Perpendicular Nylon Fibers act like a soft brush and allow improved collection of cell samples. Capillary action between the Nylon fiber strands facilitates strong hydraulic uptake of liquid samples. Sample stays close to the surface allowing easier elution.
★Traditional Fibers sample collection rate is only 20% ~30%, but the flocked sample swabs can reach 95%.
★Flocked swabs can increase the percentage of recovery of micro-organisms from 20% up to 60% compared to the traditional swabs.
★Fluffy texture can collect more target analytes.
★Molded break points are convenient for transportation and pollution-free.
Reasons you should pick flocked swabs:
Traditionally, compact fibers such as cotton, polyester, and rayon have been used to create swab tips. The fibers are compressed and shaped into the desired tip type.
These fibers still have many useful applications today. But it's estimated that only 10%–15% of the organisms collected on traditional spun fiber swabs can be recovered from cultures. The nature of spun fiber means entrapment of the specimen.
With particularly small samples, this could mean losing virtually all usable specimen, prohibiting subsequent sample analysis. The construction and shape of the swab are also important as these affect the amount of specimens recovered.
The ideal collection device must have the ability to absorb and release the sample and maintain the viability. This brings us to flocked swabs
| Material | Nylon flocked tip+ABS stick |
| Color | White |
| Size | 3",4",6",8",16" etc customized |
| Sterile | Non-sterile/EO/R |
| Packing | Customized |
| Certificate | CE0197, ISO13485, Japan registration, Russia registration. |
| OEM & ODM | Yes |
| Application | Sampling, cleaning |
| | | | | |
| | | | 200 pcs/zip bag, 4000pcs/ box | |
| | | | 200 pcs/zip bag, 4000pcs/ box | |
| | | | 200 pcs/zip bag, 4000pcs/ box | |
| | | | 200 pcs/zip bag, 4000pcs/ box | |
| | | | 200 pcs/zip bag, 4000pcs/ box | |
Instruction
1. Remove the swabs from its package.
2. Ask the patient to open their mouth and vigorously rub the inside of each cheek and over the gums of the test subject for 30 seconds.
3. Air dry the swab for 3 minutes.
4. Snap the swab at the break point to fit in tube and screw the cap tightly.
5. Label with appropriate patient information.
6. Place specimen in the biohazard bag and seal bag.
